© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
101
4.0 Lubrication
4.1 Daily Lubrication
Lubricate all the following points with a high quality EP No. 2
lithium grease.
Daily lubrication intervals are based on a 10-hour day. If the
refuse vehicle is operated more hours per day or double-
shifted, adjust the maintenance interval accordingly.
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
If your refuse vehicle is equipped with a tag axle, refer to
the Operator and the Maintenance Manual supplied by the
manufacturer for the proper lubrication and maintenance.
Preventive Maintenance
To Next Page
