EN
Installation | 21
WARNINGS
For use only by medically trained and qualified persons who have been adequately
trained in the use of Thopaz
+
.
CAUTIONS
Before the first application in accordance with the intended use, an inspection according
to IEC 62353 (see Appendix B) is recommended to acquire the reference values.
4. 4.1 Select language.
4.2 Confirm with «OK».
4.3 Follow instructions on
display.
3. 3.1 Charge for approximately
3 hours or until the [ ]
symbol appears in the
display.
3.2 Press [
] to switch
Thopaz
+
on. A selftest
starts.
1. 1.1 Select plug.
1.2 Attach plug to the mains
adapter
077.0148.
Important: Do not connect the patient to the system yet!
2. 2.1 Connect Thopaz
+
to
mains by mains adapter
077.0148 or by
docking station
079.0 037.
Initial startup
6.2
To Next Page
Loading...
