Medela Thopaz+ - Change settings; Save a changed parameter as the new standard

38 | Changing settings
WARNINGS
The settings may only be changed by the physician or on medical orders.
CAUTIONS
Adapt pressure settings for pediatric patients.
Change settings
10.2
Important: Thopaz
+
is on Standby.
2.1 Choose the desired
parameter by pressing
[
].
2.2 Confirm with «OK» [
]
to change the desired
parameter.
2.3 Change the desired
parameter by pressing
[
] or [ ] and confirm
with «OK» [ ].
2.4 Press «Home» [
] to
leave the settings.
2.5 The settings are changed
for the current therapy.
2.
1.1 Press «Menu» [
].
1.
Save a changed
parameter as the
new standard
10.3
Change all desired parameters as mentioned above.1.
Choose «Save as standard» and press «OK» [
]. «Saved»
will appear for approx. 3 seconds.
2.
The parameters are saved as the new standard. Whenever
you switch Thopaz
+
on and choose a new patient, Thopaz
+
will be set with these settings.
3.
Press «Home» [
] to leave the settings.
4.