32 | Preparation for use / operating instructions
Switching Thopaz
+
off
Release, remove and seal the canister by the canister seal.
Dispose of canister and patient tubing in accordance with
internal hospital guidelines.
3.
Clean Thopaz
+
according to chapter 13 – General cleaning
guidelines.
4.
2.
2.1 Press [
] to switch off
Thopaz
+
.
7.8
1. 1.1 Clamp patient tubing with
the tube clamp.
1.2 Clamp patient catheter
(drain).
1.3 Press «Standby» for longer
than 3 seconds to switch
off the pressure.
3 sec.