Medela Thopaz+ - 13 General cleaning guidelines

42 | Troubleshooting and alarms | General cleaning guidelines
Visible on display
Error
number
Problem
description
Troubleshooting
instructions
Remarks / Potential
source of error
Pressure
Internal error
Internal error
XXX
1. Switch Thopaz
+
off
and on again
2. Inform Medela
Customer Service
Safety related tip
The acoustic alarm «Leak in system – 301» is deactivated for approximately 6 minutes
after Thopaz
+
is switched on.
13 General cleaning guidelines
WARNINGS
After each use, the parts that have been in contact with aspirated secretions are to be
cleaned and disinfected or disposed.
General notes
– For detailed information refer to Medela cleaning guideline: 200.2391.
– This cleaning guideline relates to the cleaning of the entire Thopaz
+
product ranges see
Appendix A.
– Never place electrical devices in water or other liquids, specifically Thopaz
+
and the docking
station.
– Do not spray or pour liquid directly onto Thopaz
+
/docking station.
– Thopaz
+
product range cannot be sterilized.
– Rinsing the Thopaz
+
product range in a washing machine is not permitted.
– Immersion disinfection, thermal disinfection and ultrasound cleaning for the Thopaz
+
product
range are not permitted.
– Higher temperature than 45°C, 113°F can cause protein coagulation which can lead to
problems further in the process.
– Clean all surfaces immediately after use to avoid residues from drying and to prevent growth
of microorganisms.
– Do not use cleaning agent/detergent based on phenol.
– Do not use steel brushes or steel wool for cleaning.
– Store medical products dry and dust free.