Medela Thopaz+ - Canister with solidifier: activation of the solidification process

EN
Replace canister | 35
10. Dispose of the used canister in accordance with internal
hospital guidelines.
9. 9.1 Seal the used canister with
the canister seal.
8. 8.1 Check credibility of air
leak value.
1.1 Check if canister is sealed
with the canister seal.
1.2 Press – to open the
solidifier chamber.
Canister with solidifier:
activation of the
solidification process
press&
shake
technology
TM
2.1 Shake – to activate the
solidification process.
2.2 Dispose of the used
canister in accordance
with internal hospital
guidelines.
7. 7.1 Check canister matching:
Detected canister size vs.
attached canister.
No match: Dispose
canister.
7.2 Press «On». Pressure is
built up and unclamp the
tube clamp.
1.
2.