Function Menu
Beat Type
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select beat type menu. The LCD displays
“xxx Beat”.
Use [+/YES]/ [-/NO] button or data dial to change beat type. The
range of beat type: 0, 2~9.
2. Press [+/YES] and [-/NO] buttons simultaneously will set the beat
type value to its default setting: 4.
Pedal Type
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select pedal type menu. The LCD displays
“001 Ped Sust”.
Use [+/YES]/ [-/NO] button or data dial to change pedal type.
2. There are 4 types of pedal are available.
3. Press [+] and [-] buttons simultaneously will set the pedal type to
its default setting: Sust.
17
No.
1
2
3
4
LCD Display
Ped Sust
Ped Soft
Ped Mem
Ped St/S
Pedal Function
Sustain Pedal
Soft Pedal
Memory Switch Pedal
Start/Stop Pedal
Note:
1. This instrument allows normally open and normally closed pedal,
and it would be automatically detect pedal type when powered on.
2. We don’t recommend you pressing the pedal while turning the
instrument on, because if you do that the pedal function would be
inverted.
EQ Type
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select the EQ type menu. The LCD displays
“006 EQ Reset”.
Use [+/YES]/ [-/NO] button or data dial to change EQ type.
There are 6 EQ types are available.
No.
1
2
3
4
5
6
LCD Display
EQ Pop
EQ Rock
EQ Class
EQ Jazz
EQ Dance
EQ Reset
EQ Type
Pop
Rock
Classical
Jazz
Dance
Reset
Reverb Type
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select reverb type menu. The LCD displays
“004 RevHall1”.
Use [+/YES]/ [-/NO] button or data dial to change reverb type. The
default setting is Hall 1.
No.
1
2
3
4
5
6
7
8
9
10
LCD Display
RevRoom1
RevRoom2
RevRoom3
RevHall1
RevHall2
RevHall3
RevChrh1
RevChrh2
RevDelay
RevPnDly
Reverb Type
Room 1
Room 2
Room 3
Hall 1
Hall 2
Hall 3
Church 1
Church 2
Delay
Pan Delay
Beat
Ped Sust
EQ Reset
RevHall1
PIANO
FUNCTION
SHIFT
/ NO
/ YES
PIANO
FUNCTION
SHIFT
/ NO
/ YES
PIANO
FUNCTION
SHIFT
/ NO
/ YES
PIANO
FUNCTION
SHIFT
/ NO
/ YES