O.T.S.
TOUCH
M3
M4BANK
STORE
RECORD PLAY
DSP
DICT.
M2
LOWER
M1
DUAL
Register Memory
The Registration Memory feature can make your performance more
easily and efficiently. It allows you to save virtually all panel settings to
a Registration Memory setting, and you can instantly recall custom
panel settings by pressing a single button.
Registration Banks
There are 8 memory banks, and each bank has 4 memories (M1-M4).
Registering the Panel Setting and
Recalling the Registered Panel Settings
1. Holding down the [STORE] button press one of the registration
memory buttons: [M1] - [M4]. Notice that the new settings will
replace the previous memory data.
2. Press one of the registration memory buttons: [M1] - [M4]. In this
example, press [M2] button, the panel settings stored in the
memory 2 of bank 1 are recalled.
3. Press the [BANK] button, adjustable range 1~ 8, the LCD displays
“00x Mem Bank”.
Store Parameters to M1-M4
You can store the following parameters to M1-M4: Voice (including
voice, dual, lower, DSP, mixer), Accompaniment (including style,
tempo, and accompaniment no/off), Function Parameters (including
velocity, part parameters in function menu).
Note:
1. Calling up a registered memory, change its parameters differently,
the memory number which displayed on the LCD will be cleared.
2. All the memory parameters will be saved even turn the power off.
22
One Touch Setting
When One Touch Setting is switched on, you can instantly recall all
auto accompaniment related settings including voices selection and
digital effects simply with a single touch of a button.
1. Press the [O.T.S.] button to turns on the One Touch Setting for
current style. The LCD displays “O.T.S. ”. Press one of the One
Touch Setting buttons [M1]-[M4].Various panel settings (such as
voice, effect, etc.) that match the selected style can be instantly
recalled with just a single button press. Auto accompaniment is
automatically turned on during O.T.S mode and the lower and dual
function automatically shut down.
2. If you press the [O.T.S.] button, switch to the registered memory.
The LCD displays “MEMORY”.
3. The configuration data of O.T.S.:
Voice (Volume, Pan, Octave)
Dual (Volume, Pan, Octave)
Left Hand (Volume, Pan, Octave)
Note:
The O.T.S. automatically turned off when you enter the song mode.
Mem Stor
Mem Bank
O c t P n o 2
To Next Page
Loading...
Need help?
General
