Pedal Function
The sustain pedal is a single pedal which can be configured to different
pedal function. Please refer the pedal setting menu for detail.
1. Sustain Pedal(Pedel Sust)
If assign pedal is set as “Pedel Sust”, step on the assign pedal, all
notes played on the keyboard will have a longer sustain
2. Pedal Start/Stop(Pedal St/T)
If pedal assign is set as “Pedal St/T”, the assign pedal will have the
same function as [START/STOP] button.
3. Pedal Memory Select(Pedal Mem)
If pedal assign is set as “Pedal Mem”, it will load the next memory
parameter from M1 when you step on the pedal.
The total number of memory you can load is 32.
Pedal Sust
Pedal St/T
Pedal Mem
23
To Next Page
Loading...
