page 8 of 73
BASIC TERMS AND PARAMTERS
BASIC TERMS AND PARAMTERS
Before you begin working with the router, please familiarize yourself with the following basic
terms:
The router needs to be connected to a single-phase ~220 line. It is of utmost importance that the
power line is properly grounded. Before you plug the machine to the power source, please connect
all the labeled plugs between the machine and the controller as well as the USB cable between the
controller and the machine. All the plugs and cables are suitably labeled.
To turn the machine on, please turn the main switch clockwise. To turn the machine off, press
this switch all the way down.
www.megaplot.com phone: +48 693 707 575 office@megaplot.com
To Next Page
Loading...