Need help?Do you have a question about the Megaplot XMD32 and is the answer not in the manual?
Clarifies the difference between machine home and project starting positions.
Step-by-step guide to starting the MegaCut 2D software.
Overview of configurable settings within the MegaCut 2D software.
Instructions for loading, opening, and simulating design files.
Procedures and steps for initiating the cutting process.
Interface for manual operation and control of machine axes.
Procedure to return the machine to its home position.
Setting the origin point for a project.
Steps to start, initialize, and activate MegaCut 3D software.
Overview of configurable settings and language options for MegaCut 3D.
Interface overview and the typical 3D tooling process sequence.
Instructions for importing 3D models into MegaCut 3D.
How to load and convert BMP files into 3D models.
Settings for material dimensions, pad thickness, and model positioning.
Generating and managing tool path output files for 3D models.
Detailed steps for automatic tool length measurement.
Procedures for homing and different views of manual control.
Process for calibrating machine axes for accuracy using a text file.
General| Brand | Megaplot |
|---|---|
| Model | XMD32 |
| Category | Power Tool |
| Language | English |
To Next Page
