page 46 of 73
etc.). When done, the line should look as follows:
"C:\Program Files\Megaplot\MegaCut3D\MegaCut3D.exe" PL
Control Window - enlarged
The control window can be switched to a special touch-screen friendly mode (See Manual
Control window). While the functionality remains the same, the modified look with larger buttons,
etc. is better suited for operation with fingers, instead of a mouse.
To force the modified view, you will need to modify the software shortcut again (as explained
above when changing the language version). After a space, add TouchPanel so the line looks like
this:
"C:\Program Files\Megaplot\MegaCut3D\MegaCut3D.exe" touchPanel
www.megaplot.com phone: +48 693 707 575 office@megaplot.com
To Next Page
Loading...
