When a malfunction occurs, a grey or red message is shown on the display depend-
ing on the nature of the malfunction.
• Grey messages can be acknowledged using the relevant confirmation key.
• Red messages usually require the deployment of an authorised service techni-
cian!
No. Display text Note / possible cause Measures / remedial action
1 Bottom pan leakage
• There is a leak
• Minimum signal duration 5 sec-
onds to activation
• Not possible to continue work-
ing
• Call a service technician!
6
Programme cancelled
prematurely
• On/off key activated during
wash programme
• Door was opened during the
rinse process
• Start rinse process again
7 Door not closed
• Door is open
• Magnetic switch defective or ad-
justed incorrectly
• Cable breakage
• Plug connection of the wiring
• Close the door
8
Door switch signals
different:
Switch left: "1"
Switch right: "0"
• Corresponding magnetic
switches/magnets depending on
door position
• Cable breakage
• Plug connection of the wiring
• Call a service technician!
• Limited possibility of continuing
working
9
Door switch signals
different:
Switch left: "0";
Switch right: "1"
• Corresponding magnetic
switches/magnets depending on
door position
• Cable breakage
• Plug connection of the wiring
• Call a service technician!
• Limited possibility of continuing
working
11 Carry out maintenance • Carry out maintenance
• Possible to continue working
• Call a service technician!
12 Access code wrong!
• Input code not available in inter-
nal table
• Correct entry code