Operating instructions Glass-, dish- and utensilwashing machine
M-iClean U
9712938 53 / 68
Design and construction subject to change without prior notice!
Action menu
Symbol Level Description
Bleed detergent
pipelines
1, 4
Starts detergent or rinse aid dosage pump
to bleed the conveyor pipelines when re-
quired e.g. when the storage containers
are empty during operation.
Bleed rinse aid
pipelines
1, 4
Manually start
water change
1, 4
If automatic wash tank water regeneration
is insufficient, an additional water change
may be necessary.
Descale
1, 4 Starts descaling programme.
9.8 Ventilating the pipes
The detergent or rinse aid pipes must be ventilated, if air is sucked in from the dos-
ing equipment. This occurs if a storage container is completely emptied during oper-
ation, or if one of the suction lances is not positioned right down to the base of the
container.
1. Switch to authorisation level 1 User configuration level, see section "Change
authorisation level" on page 51.
2. Call up the action menu using the relevant confirmation key.
3. Select the required submenu.
4. Start the ventilating procedure by using the relevant confirmation key.
To Next Page
Loading...
Need help?
General
