Meiko M-iClean UM Operating Instructions

Operating instructions Glass-, dish- and utensilwashing machine
M-iClean U
Operation/use
9712938 49 / 68
Design and construction subject to change without prior notice!
No. Display text Note / possible cause Measures / remedial action
880
Communication
with SMART-WIRE-
node addr. 1
• SI1 board defective
(ID-Chip)
• Not possible to continue work-
ing
• Switch off the building-side
fuses
• Call a service technician!
892
Communication
with SMART-WIRE-
node addr. 13
• SI31 board defective (lighting
board)
• Possible to continue working
• Call a service technician!
901
Communication
with CAN bus ad-
dress 1
• Communication cable not
plugged in
• CAN address switch set incor-
rectly
• No power supply for I/O board
• I/O circuit board is defective
• Not possible to continue work-
ing
• Call a service technician!
902
Communication
with CAN bus ad-
dress 2
960 EEPROM error • EEPROM access fault
• Not possible to continue work-
ing
• Call a service technician!
963
Access fault Blue-
tooth
• An error occurred when access-
ing the Bluetooth module and,
as a consequence, it may be un-
available
• Acknowledge the message
• Possible to continue working
• Call a service technician!
969
Buffer battery criti-
cal
• If a power interruption occurs,
the date and time are undefined
• Acknowledge the message
• Limited possibility of continuing
working
• Call a service technician!
971
Operating panel will
be re-initialised
• Plug connection open
• Glass panel not responding.
• If the error message reoccurs,
call a service engineer
As a rule, faults that are not described herein require assistance from an authorised
service technician. Please contact your factory representative or authorised dealer.

Meiko M-iClean UM Specifications

General

Brand	Meiko
Model	M-iClean UM
Category	Dishwasher
Language	English