| 3534
INSTALLATION INSTRUCTIONS CLEANING
1. Screw the base to the water
outlet tightly and then fasten
the floor bolts.
3. Position the spout outlet over
the bath before tightening the
grub screw.
2. Slide the cover plate onto the
spout from the bottom before
fastening the spout to the base.
4. Slide the cover plate down over
the base plate once the floor
bolts have been tightened.
• Do not install the tapware using any form of acetone silicones.
• Do not apply physical items (such as tools) directly to the product.
• Never use detergents, acidic based, or abrasive cleaners and do not
use undue pressure.
• A soft cloth can be used to remove surface dust. Alternatively, wipe
with warm soapy water to ensure the finish remains in a superior
condition for continued use.
• The use of wax-based furniture products should be avoided.
These can result in a build-up of deposits that can detract from
the appearance of the product.
To Next Page
Loading...