EasyManua.ls Logo

Melex 465 - 6. Maintenance Works Program

Default Icon
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owners manual MELEX 4XX MELEX 2021/01
47
6
.
MAINTENANCE WORKS PROGRAM
Maintenance work description
Daily or
prior to
each
use
Weekly
Monthly
or after
mileage
of 500
km
Quarterly
or after
mileage of
1500 km
Semi-
annually
or after
mileage of
3000 km
Annually
or after
mileage of
6000 km
Every
two
years
Every
three
years
1
2 3 4 5 6 7 8 9
Re-charge batteries
U U U U U U U U
Check electrolyte level in batteries
U U U U U U U U
Check and note electrolyte density,
voltage and batteries condition (after
charging) - form
U U U U U U U
Check the lights, signaling lamps,
acoustic signalization
U U U U U U U U
Check correct work of the hand brake
signaling lamp
U U U U U U U U
Check the brakes
U U U U U U U U
Check tyre wear
U U U U U U U U
Check the receptacle and battery
charger plug
U U U U U U U U
Clean the batteries
U U U U U U U U
Check the condition of the battery
cables connections
U U U U U U U U
Check loose or broken wires and
screw and connector terminals,
and improve or replace if needed
U U U U U U U
Refill the missing fuses in the relay
box
U U U U U U
Check condition of all screws
connection - Tighten out
U U U U U U
Remove dirt from flexible connectors
U U U U U
Check correct work of the accelerator
pedal
S S S S
Check oil level in the gear, re-fill if
necessary
S S S S
Check and remove clearance in
steering system if necessary
S S S
Check front wheels toe-in
S S S
Check clearances on rear axle shafts
S S S
Check power supply system
S S S
Check shock absorbers and
exchange if necessary
S S S
Check the central water filling system
U
U - actions recommended to be taken by User, S - actions recommended to be taken by authorized Producers service
ATTENTION
In case of the observed inefficiency of the electric AC system, prior to reporting of the
claim to Producer it is recommended to identify reason for the inefficiency on the basis of the
fault code signalled with speed controller diode (see chapter 5.4 of the manual).
The battery charger examination should be conducted in accordance to chargers
Producer’s manual. A person responsible for battery charger examination should be

Related product manuals