Melex 465 - 8.2. Information Plate - Places of Electric Shock Risk

Owners manual MELEX 4XX MELEX 2021/01
50
Following data are mentioned on information plate:
1- Marking of vehicle model
2 - Max permissible load on the box
3 - Permissible load on the box – for the load spread on the front half of the box
4 - Permissible load on the box – for the load spread evenly across the box
5 - Permissible load on the box – for the load spread on the rear half of the box
Placement of the plate on the vehicle
Drawing 8-1-2
8.2 Information plate - places where the risk of electric shock can
occur
Each 4xx homologated vehicle must have information plates in places where there is a risk of
electric shock:
Drawing 8-2-1