Owners manual MELEX 4XX MELEX 2021/01
55
Refilling electrolyte level in traction batteries
1. Take off the cover protecting against soiling.
2. Connect lead pipe to HydroLink one situated in vehicle.
3.
Observe flow sensor. Red balls inside sensor start turn themselves until the moment of
refilling electrolyte level
.
4. After finishing operation of refilling the electrolyte level disconnect the filling device
from HydroLink system in vehicle. To make this, press button and disconnect both
endings.
5. Assembly cover protecting against soils.
It is recommended to do manual control of electrolyte level each month despite of
installing and regular using of HydroLink system.
To Next Page
Loading...