EasyManuals Logo

Melitta Avanza User Manual

Melitta Avanza
Go to English
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
First steps
37
GB
3 First steps
This chapter describes how to prepare
your appliance for use.
3.1 Unpacking the appliance
Unpack the appliance. Remove the
packaging material, the adhesive
strips and the protective lms from the
appliance.
Keep the packaging material for trans-
port and any return shipments.
Information
The appliance may contain traces of coee
and water. The appliance has been tested
in the factory to ensure that it functions
perfectly.
3.2 Checking the delivery
contents
Check the completeness of delivery using
the following list. If parts are missing,
contact your retailer.
Cappuccinatore
Milk hose
Screw-in aid for the water lter
Test strip for determining the water
hardness.
3.3 Installing the appliance
Observe the following instructions:
Do not install the appliance in damp
rooms.
Install the appliance on a stable, at
and dry surface.
Do not install the appliance in the vicin-
ity of sinks or the like.
Do not install the appliance on hot
surfaces.
Install the appliance at a sucient
distance (approx. 10cm) from the wall
and other objects. The space above the
appliance should be at least 20cm.
Route the power cable so it cannot be
damaged by edges or hot surfaces.
3.4 Connecting the appliance
Observe the following instructions:
Check that the supply voltage matches
the operating voltage specied in the
technical data (see tableTechnical data
on page55).
Only connect the appliance to a prop-
erly installed earthing contact socket. If
in doubt, consult a specialist electrician.
The earthing contact socket must have
a fuse of at least 10 A.
3.5 Connecting the
Cappuccinatore
You can prepare hot water and milk foam
with the Cappuccinatore.
23
25
21
Fig. 5: Connecting the Cappuccinatore
1. Connect the Cappuccinatore to the
steam pipe(21). Slide the connection
of the Cappuccinatore to the stop of
the steam pipe.
2. Connect the milk hose(25) to the Cap-
puccinatore.
3. If you do not want to use milk, clamp
the milk hose in the holder(23).
3.6 Switching on the appli-
ance for the rst time
Once you switch on the appliance for the
rst time, the appliance performs auto-
matic rinsing. Hot water rst ows out of
the Cappuccinatore, then out of the outlet.
The appliance is vented.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta Avanza and is the answer not in the manual?

Melitta Avanza Specifications

General IconGeneral
Weight7.5 kg
Water Tank Capacity1.5 L
Bean Container Capacity250 g
Pump Pressure15 bar
Power1450 W
Milk FrotherYes
Adjustable Coffee StrengthYes
Adjustable Coffee SpoutYes
Voltage220-240 V
Grinder TypeSteel Cone Grinder
Adjustable Grinding DegreeYes
Adjustable Water AmountYes
Height-Adjustable Coffee OutletYes
Automatic Shut-OffYes
Cleaning ProgramYes
Descaling ProgramYes
TypeAutomatic Coffee Machine
Number of Cups2

Related product manuals