Melitta Avanza User Manual

Care and maintenance
47
GB
Press the "Coee" direct key to exit the
service mode without saving the settings.
Information
If no further input is made within 1min-
ute, the appliance returns to Ready mode.
6.7 Resetting the appliance to
the factory settings
The appliance can be reset to the factory
settings. When resetting, your settings in
the functions will be lost.
Requirement: The appliance is ready for
operation.
1.  Press the "Service" button as
well as the "Coee" direct key for more
than 2seconds to enter Service
mode2.
2.  Press the "Service" button
repeatedly until the display for the
Factory settings function appears.
3. Press the "Coee strength" button
repeatedly until the display of one
coee bean appears.
4. Press the "Service" button for
more than 2seconds to reset the
appliance to the factory settings and
exit the service mode.
6.8 Setting the grinding
neness
The grinding neness of the coee pow-
der inuences the avour of the coee.
If the grinding neness is set ner, the
coee avour is stronger.
ATTENTION
Very nely ground coee powder can
clog the brewing unit.
 The grinding neness has been
optimally set prior to delivery. Adjust
grinding neness at the earliest after
about 100coees are dispensed (after
approx.1month, depending on coee
consumption).
 Do not set the grinding neness too
ne. The grinding neness is optimally
set when the coee ows evenly out
of the outlet and a ne, dense crema
appears.
Adjust the grinding neness while the
grinder is running.
Requirement: The appliance is ready for
operation.
11
10
Fig. 14: Setting the grinding neness
1. Open the cover (11). To do this, reach
into the recess on the right of the appli-
ance and pull the cover o sideways.
2. Prepare any coee beverage.
3. Move the lever (10) to the left or right
while the grinder is running.
To the left = grinding neness ner
To the right = grinding neness coarser
4. Insert the cover(11) sideways until it
engages.
7 Care and maintenance
Regular care and maintenance of the
appliance ensure the consistent high qual-
ity of your beverages.

Melitta Avanza Specifications

General

Weight	7.5 kg
Water Tank Capacity	1.5 L
Bean Container Capacity	250 g
Pump Pressure	15 bar
Power	1450 W
Milk Frother	Yes
Adjustable Coffee Strength	Yes
Adjustable Coffee Spout	Yes
Voltage	220-240 V
Grinder Type	Steel Cone Grinder
Adjustable Grinding Degree	Yes
Adjustable Water Amount	Yes
Height-Adjustable Coffee Outlet	Yes
Automatic Shut-Off	Yes
Cleaning Program	Yes
Descaling Program	Yes
Type	Automatic Coffee Machine
Number of Cups	2