EasyManuals Logo

Melitta Avanza User Manual

Melitta Avanza
Go to English
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Basic operation
38
GB
CAUTION
Hot water and hot steam owing out of
the pipe
Do not reach into the outowing hot
water.
Do not touch the steam pipe during
and immediately after use. Wait until
the steam pipe has cooled down.
Information
We recommend pouring away the rst
two cups of coee after initial start-up.
If you want to use a water lter, only
insert this after starting up for the rst
time.
20
Fig. 6: ON/OFF button
Requirement: The appliance has been
installed and connected.
1. Place a vessel beneath the Cappucci-
natore.
2. Press the ON/OFF button (20).
» The Ready display lights up
briey.
» The Water display lights up and
requests you to ll the water tank.
3. Open the lid of the water tank and
pull the water tank upwards out of the
appliance by the handle.
4. Rinse out the water tank with clean
water. Fill the water tank with fresh
water.
5. Insert the water tank into the appliance
from above and close the lid.
» The Steam display lights up and
requests you to open the "valve".
6. Open the "valve".
» Hot water rst ows out of the Cap-
puccinatore.
7. Once no more water ows
out of the Cappuccinatore, close the
"valve".
» Hot water ows out of the outlet.
» The appliance is vented.
8. Fill coee beans into the bean con-
tainer (see section4.3 Filling coee
beans into the bean container on
page11).
9. As required, you can now either
a) set the water hardness (see sec-
tion6.3 Setting the water hardness on
page45) or
b) screw in a water lter (see sec-
tion7.6 Using a water lter on
page52).
4 Basic operation
4.1 Switching the appliance
on and o
Before switching on after starting up the
appliance for the rst time, read sec-
tion3.6 Switching on the appliance for the
rst time on page37.
Information
When switched on and o, the appli-
ance performs automatic rinsing.
During rinsing, rinsing water is also
conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the "ON/OFF" button (20).
» The appliance heats up and performs
automatic rinsing.
» The appliance is ready for operation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta Avanza and is the answer not in the manual?

Melitta Avanza Specifications

General IconGeneral
Weight7.5 kg
Water Tank Capacity1.5 L
Bean Container Capacity250 g
Pump Pressure15 bar
Power1450 W
Milk FrotherYes
Adjustable Coffee StrengthYes
Adjustable Coffee SpoutYes
Voltage220-240 V
Grinder TypeSteel Cone Grinder
Adjustable Grinding DegreeYes
Adjustable Water AmountYes
Height-Adjustable Coffee OutletYes
Automatic Shut-OffYes
Cleaning ProgramYes
Descaling ProgramYes
TypeAutomatic Coffee Machine
Number of Cups2

Related product manuals