EasyManuals Logo

Melitta Avanza User Manual

Melitta Avanza
Go to English
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Care and maintenance
50
GB
4. Empty the drip tray and the coee
grounds container.
5. Insert the drip tray without the coee
grounds container.
6. Place the coee grounds container
beneath the outlet.
» The appliance rinses twice.
» The Clean display ashes
rapidly and requests you to remove
the brewing unit and insert a clean-
ing tablet.
7. Remove the brewing unit. Do not
switch o the appliance.
8. Rinse the brewing unit under running
water (see section7.3 Cleaning the
brewing unit on page48).
9. Place a cleaning tablet in the brewing
unit. Insert the brewing unit into the
appliance.
Fig. 18: Placing a cleaning tablet in the
brewing unit.
 The second stage of the cleaning
programme starts. Two coee beans light
up.
» The appliance performs several
rinsing operations.
» The Drip tray display lights
up and requests you to empty the
drip tray and the coee grounds
container.
  The third stage of the cleaning
programme starts. Three coee beans light
up.
10. Empty the drip tray and the coee
grounds container.
11. Insert the drip tray without the coee
grounds container.
  The fourth stage of the cleaning
programme starts. The three coee beans
ash.
12. Place the coee grounds container
beneath the outlet.
» The appliance performs several
rinsing operations.
» The Drip tray display lights
up and requests you to empty the
drip tray and the coee grounds
container.
13. Empty the drip tray and the coee
grounds container.
14. Insert the drip tray and the coee
grounds container.
» The cleaning programme is nished.
» The Clean display goes out.
» The appliance is ready for operation.
Information
If the cleaning programme has been
interrupted, e.g. because you uninten-
tionally switched o the appliance, you
must switch the appliance on again and
follow the instructions from step 10. The
appliance is then ready for operation, even
if it has not been completely cleaned.
For complete cleaning, you must run the
cleaning programme from the beginning.
7.5 Running the descaling
programme
The descaling programme is used to
remove limescale deposits in the interior
of the appliance with fully automatic
coee maker descaling agents.
To avoid damage to the appliance, we
recommend running the descaling pro-
gramme every 3 months or as requested
by the appliance, unless you regularly use
a water lter.
The Descaling display light
requests you to descale the appliance.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta Avanza and is the answer not in the manual?

Melitta Avanza Specifications

General IconGeneral
Weight7.5 kg
Water Tank Capacity1.5 L
Bean Container Capacity250 g
Pump Pressure15 bar
Power1450 W
Milk FrotherYes
Adjustable Coffee StrengthYes
Adjustable Coffee SpoutYes
Voltage220-240 V
Grinder TypeSteel Cone Grinder
Adjustable Grinding DegreeYes
Adjustable Water AmountYes
Height-Adjustable Coffee OutletYes
Automatic Shut-OffYes
Cleaning ProgramYes
Descaling ProgramYes
TypeAutomatic Coffee Machine
Number of Cups2

Related product manuals