EasyManuals Logo

Melitta CI TOUCH F630-101 User Manual

Melitta CI TOUCH F630-101
Go to English
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Care and maintenance
45
GB
System
The System menu provides information
on the software version and access to
the venting function, see section10.1,
page50.
8.8 Setting the grinding
neness
The grinding neness of the coee beans
inuences the avour of the coee. The
grinding neness has been optimally set
prior to delivery.
Fig. 12: Grinding neness setting
Use the lever on the rear side to set the
grinding neness.
1. Move the lever:
ū To the right = grinding neness
coarser
ū To the left = grinding neness ner
Information
ū If the grinding neness is set ner, the
coee avour is stronger.
ū The grinding neness is optimally set
when the coee ows evenly out of the
outlet and a ne, dense crema appears.
9 Care and maintenance
Regular cleaning and maintenance ensure
the consistent high quality of your bever-
ages.
9.1 General cleaning
Clean the appliance regularly. Immediately
remove external soiling caused by milk
and coee.
ATTENTION
The use of unsuitable cleaning agents
can lead to scratched surfaces.
Do not use any abrasive cloths, sponges
or cleaning agents.
Requirement: The appliance is switched
o.
Clean the outside of the appliance with
a soft, damp cloth and normal wash-
ing-up liquid.
Rinse the drip tray and the coee
grounds container with a soft, damp
cloth and normal washing-up liquid.
Clean the bean container with a soft,
dry cloth.
9.2 Rinsing the coee system
During rinsing, the nozzles at the outlet
and the internal parts of the coee system
are rinsed. As a result, rinsing water from
the interior enters the drip tray.
If switch-o rinsing is not deactivated, the
appliance rinses the coee system when
switching on and o.
Rinsing can also be carried out manually.
Requirement: The appliance is ready for
operation.
1. Place a vessel beneath the outlet.
2. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Rinsing menu.
4. Select Start and conrm your selection.
» The coee system is rinsed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta CI TOUCH F630-101 and is the answer not in the manual?

Melitta CI TOUCH F630-101 Specifications

General IconGeneral
BrandMelitta
ModelCI TOUCH F630-101
CategoryCoffee Maker
LanguageEnglish

Related product manuals