SDM-9XXX SeriesHardware Installation Guide
1-4 Memotec Inc.
• A DB9F-DB9F console cable and 19-inch rackmount kit are also included in the
product package
• A custom cable (HD-26 male connector) is required for the serial port, available
from Memotec Inc. or your NetPerformer distributor.
The basic software set provides support of PowerCell Voice and Data (including legacy
user data) and IP routing over Ethernet, serial or digital ports using PPP or Frame Relay
RFC-1490. Optional software licenses can be procured for support of:
• SkyPerformer satellite access
• TCP Acceleration
• SIP VoIP
• IP header compression
• Link Delay Compensation
•
IPv6.
1.1.4 Sales Contacts
To order NetPerformer units, DSP modules, cables and optional parts, contact Memotec
Inc. or your NetPerformer distributor. To contact Memotec Inc.:
• Mail:
Memotec Inc.
7755 Henri Bourassa Blvd. West
Montreal, Quebec
Canada H4S 1P7
• Telephone: +1 (514) 738-4781 during regular business hours, EST (GMT-5:00)
Fax: + (1) 514 738 4436
• Web: http://www.memotec.com
To Next Page
Loading...
Need help?
General
