Need help?Do you have a question about the Memotec NetPerformer SDM-9230 Series and is the answer not in the manual?
General| Brand | Memotec |
|---|---|
| Model | NetPerformer SDM-9230 Series |
| Category | Network Hardware |
| Language | English |
Criteria for choosing an appropriate installation location for the unit.
Lists required hardware, cables, and devices for installation and configuration.
Step-by-step instructions for safely opening the unit's chassis for internal access.
Procedure for safely removing a DSP module from the unit.
Procedure for safely removing a DSP module from the unit.
Instructions for properly closing the unit's chassis after component installation.
Procedure for safely removing installed interface cards from the unit.
Explains NT/TE mode setting for ISDN-BRI S/T cards via hardware strapping.
Step-by-step guide for installing interface cards into the unit's slots.
Instructions for mounting the SDM-9120 unit into a standard 19-inch rack.
Instructions for mounting the SDM-9120 unit into a standard 19-inch rack.
Instructions for mounting the SDM-9220/9230 unit into a standard 19-inch rack.
Guidance on proper grounding for E&M applications to ensure correct operation.
Information on power cord types and connecting the unit to a power source.
Information on power cord types and connecting the unit to a power source.
Describes front panel LED states during the unit's startup sequence.
Specifies required console and modem settings for successful startup.
Specifies required console and modem settings for successful startup.
Steps to establish a console connection and log into the unit.
Process for activating licensed software options using a license key.
Instructions for connecting the unit to a local area network hub via Ethernet.
Detailed description of the SDM-9120 base unit's features and rear panel components.
Detailed description of the SDM-9220/9230 base units' features and rear panel components.
Describes the features and standards supported by the unit's Ethernet ports.
Describes the PC-compatible console port's interface and supported speeds.
Instructions on how to use mounting brackets to install the SDM-9120 in a rack.
Description of the low-density DSP-160 module and its capabilities.
Description of the low-density DSP-160 module and its capabilities.
Compares interface cards used in SDM-9120 and SDM-92x0 series.
Steps to activate user equipment connections and configure parameters.
A guide to diagnosing and resolving common issues with the unit.
To Next Page