Preface
Memotec Inc. 1-5
1.2 About this Document
This document, NetPerformer® SDM-9XXX Series Hardware Installation Guide, provides
the following information about the SDM-9120, SDM-9220, and the SDM-9230:
• Regulatory compliance information (“Compliance Information and Safety Warn-
ing” on page B-1)
• Unpacking instructions (“Unpacking” on page 2-1)
• Product description (“Product Description” on page 4-1)
• Hardware installation instructions (“Hardware Installation” on page 3-1)
• Troubleshooting procedures (“Troubleshooting Tips” on page 6-1)
• Serial port specifications and user equipment connection (“Serial Port and User
Equipment Connections” on page 5-1)
For information on configuring the NetPerformer, consult the NetPerformer Reference
Guides. See the “NetPerformer Document Set” on page 1-6 for a list of other references.
NOTE: All NetPerformer documents are available on the NetPerformer Companion
CD, which is included with your product package.
CAUTION:: All documents on the NetPerformer Companion CD,
including this guide, must be opened with Adobe™ Acrobat Reader,
which is provided on the CD.
If you open a NetPerformer document with an earlier version of Acrobat Reader, some of
the text will not appear in its intended format. This can make the text difficult or
impossible to read correctly, especially from a printed copy.
1.2.1 Naming Conventions
In this document:
• The notation SDM-9XXX Series denotes the SDM-9120, SDM-9220, and SDM-
9230 products. The product is identified on the front of the unit.
• SDM-9120 products refer to the SDM-9120 UAC model.
• SDM-9220 products refer to the SDM-9220 UAC model.
• SDM-9230 products refer to the SDM-9230 UAC model.
The model number is identified on the nameplate on the bottom of the unit.