Need help?Do you have a question about the Memotec NetPerformer SDM-9120 Series and is the answer not in the manual?
General| Brand | Memotec |
|---|---|
| Model | NetPerformer SDM-9120 Series |
| Category | Network Hardware |
| Language | English |
Provides contact information and procedures for obtaining technical assistance.
Explains the need for product and work order numbers for support.
Advises on inspecting the package for damage upon receipt.
Outlines the procedure and requirements for returning a unit for repair.
Provides instructions on how to safely open the unit's chassis.
Details the procedure for installing or replacing the DSP module.
Explains the process for safely removing an installed interface card.
Provides instructions for installing interface cards into the chassis slots.
Details E&M signaling wiring and essential grounding considerations.
Discusses proper grounding for E&M applications to ensure reliable operation.
Covers power cord connection and the unit's startup sequence and LEDs.
Explains the types of power cords and how to connect them.
Describes the LED indicators and sequence during unit startup.
Guides on connecting to the console terminal and initial setup.
Specifies required console and modem settings for initial setup.
Guides through establishing a console connection and logging in.
Describes low-density (DSP-160) and high-density (HD) DSP modules.
Categorizes and details various interface cards like FXS, FXO, E&M, T1/E1, ISDN, Serial.
Compares interface card compatibility between different unit models.
Instructions for converting interface cards for SDM-9120 compatibility.
Categorizes and describes analog, digital, and serial interface cards.
Details the features and part numbers for FXS interface cards.
Details the features and part numbers for FXO interface cards.
Describes the universal E&M/PTT interface card and its features.
Lists available digital interface cards like T1/E1 and ISDN-BRI.
Details T1/E1 interface cards, their features, and interoperability.
Specific details for T1/E1 cards used with 75 Ohm connections.
Details the ISDN-BRI S/T interface card and its features.
Describes the dual serial port interface card for data traffic.
Explains the LEDs for analog voice interface cards.
Details RJ-11 cable connections for FXS and FXO cards.
Describes the E&M interface card and its RJ-45 pinout.
Details RJ-48 pinouts for T1/E1 and ISDN-BRI S/T cards.
Explains requirements for E1-75 connections on T1/E1 ports.
Lists common symptoms, their possible causes, and recommended solutions.
Lists essential safety warnings and precautions for operating and servicing the equipment.
To Next Page