Product Description
Memotec Inc. 4-23
Workaround: Substitute a dual port T1/E1 interface card for the T1 interface,
and configure it for T1 operations.
NOTE: T1 operations are indicated when the port LED labelled T1-E1 is green. E1
operations are indicated when the
T1-E1 LED is yellow. To interpret the other
status LEDs, refer to “Interface Card Status LEDs” on page 4-27.
Figure 4-14: The Single Port T1/E1 interface card (top)
Figure 4-15: The Dual Port T1/E1 interface card (bottom)
To Next Page
Loading...