Mendota D30 - Attaching Warning Label to Fireplace Insert Floor

85-03-01071 D30 DEEP TIMBER Page 55
4.7 ATTACHING WARNING LABEL TO ZC WOODBURNING FIREPLACE INSERT FLOOR
A Warning Label is supplied with the Installation Manual Packet for this appliance.
Before installing this appliance in the ZC Woodburning Fireplace insert, this label must be mechanically attached to the ZC
Woodburning Fireplace insert floor using self-drilling sheet metal screws (not supplied). Secure this label on floor on the floor
adjacent to the right or left walls.
Figure 4-19 Warning Label