85-03-01071 D30 DEEP TIMBER Page 56
4.8 INSERT BODY INSTALLATION
1. Carefully slide Insert body into the fireplace insert opening about 6”.
2. Make final Gas Line connections and perform leak tests.
3. Make final Electrical Connections and verify power connection.
4. Install a Surround or Faceplate on the unit.
5. Push Insert Body all the way into fireplace insert cavity until Surround or Faceplate touches the facing material.
4.9 SURROUND/FACEPLATE INSTALLATION
NOTE: Faceplate surrounds are only used for Mendota Door Kits (Andover, Bentley and Prairie). 3-piece
surrounds are used for all other decorative fronts and safety screen only installations.
Refer to Installation Instructions included with the Surround Kit or Faceplate kit.
To Next Page
Loading...
