Mendota D30 - Français; Table of Contents

Table of Contents
1.1 INITIAL FIRING AND CURING PROCEDURE ....................... 3
1.2 HOT SURFACES ARE NORMAL ....................................... 3
1.3 PERIODIC AND ANNUAL CLEANING ARE REQUIRED ............ 3
2.1 SAFETY AND WARNING INFORMATION ................. 6
2.2 SAFETY WARNINGS..................................................... 7
3.1 GENERAL TECHNICAL REFERENCES .............................. 11
3.2 MECHANICAL TECHNICAL REFERENCES ......................... 13
3.2.6.1.1 Horizontal Clearance Reduction by 66% ...................... 22
3.2.6.1.2 Horizontal Clearance Reduction by 50% ...................... 22
3.2.8.4.1 Paint Types Approved for Use ..................................... 26
3.2.8.4.2 Sealants Type Approved for Use.................................. 26
3.2.8.4.3 Wood Application Cautions ......................................... 26
3.3 ELECTRICAL TECHNICAL REFERENCES ............................ 34
3.6 PLUMBING TECHNICAL REFERENCES ............................. 37
4.1 INSTALLATION CHECKLIST ........................................... 41
4.2 PREPARING FOR INSTALLATION ................................... 42
4.3 LEVELING BOLTS ....................................................... 44
4.4 HOW TO REMOVE DOOR ........................................... 45
4.5 NATURAL GAS TO LPG CONVERSION ........................... 46
4.6 VENTING ................................................................. 48