EasyManua.ls Logo

Mendota D30 - Overall Insert Dimensions

Mendota D30
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85-03-01071 D30 DEEP TIMBER Page 19
Overall Insert Dimensions
Figure 3-13
A combustible wall, perpendicular and in front of this appliance's glass door face must be at least 16" away from the
side edges of visible glass.
A wall at a 45 angle to the front face and starting at the Side Edge of this appliance is allowed. Projections behind this
45 angle edge (shaded area) are allowed.
Note: For every 1” this fireplace insert is raised off the floor, the non-combustible hearth protection pad may be
reduced by 2”. If this fireplace insert is raised more than 6” off the floor, no hearth protection pad is required. See
Chapter 3.2.4.4 Hearth Pad Requirement and Chapter 3.2.7.1 Hearth Pad Temperatures.

Related product manuals