85-03-01120 M27 Page 76
4.15 M-27 ASHTON SURROUND KIT INSTALLATION
INTRODUCTION
The surround kit, available for the M27 (Chelsea) fireplace, completes
the installation. The surround kit is designed to cover the exterior
structural parts and surfaces of this fireplace. It also provides for easy
access to the commonly used control panels located on the left and
right side of this fireplace. A surround kit must be installed to
complete this fire-place installation. Choose from one of 5 finish and
color options: Gold, Antique Copper, Swedish Nickel, Natural Iron or
Black. Optional Filigree kits (available in the 5 different finishes and
colors) or a Cast Iron Decorative Overlay are available and may be
purchased and installed during the installation of a Surround Kit or at a
later date. If any of these optional kits are to be installed, install them
on the surround parts before you follow these instructions to install
the sur-round kit on the fireplace.
Identify the parts included with the surround kit.
IMPORTANT: A Hearth Pad spacer is supplied with the fireplace. This item must be removed before you
attempt to in-stall the Surround Kit on the fireplace.
To Next Page
Loading...
