Mercury 20 EFI FourStroke

2. Use prybars at the indicated pry points to aid in the removal of the bearing carrier assembly from the gearcase.
a - Pry points
3. Remove the bearing carrier and propeller shaft assembly from the gearcase.
a - Propeller shaft
b - Bearing carrier assembly
NOTE: The cam follower is free to slide out of the propeller shaft.
a - Propeller shaft
b - Bearing carrier assembly
c - Cam follower
a
a
6542
a
b
6545
62931
b
c
a
Gear Housing (2.15:1)
90-8M0125265 eng NOVEMBER 2017 © 2018 Mercury Marine Page 6A-13