Mercury 20 EFI FourStroke

9. Use a suitable mandrel to press the needle bearing out of the bearing carrier.
a - Needle bearing
b - Bearing carrier
a - Mandrel
b - Needle bearing (hidden)
c - Bearing carrier
Propeller Shaft Disassembly
1.
Inspect the cam follower for wear. Replace the follower if it is worn.
a - Propeller shaft
b - Bearing carrier assembly
c - Cam follower
2. Remove the clutch pin retainer spring from the clutch.
a
b
34382
a
b
c
34383
62931
b
c
a
Gear Housing (2.15:1)
Page 6A-16 © 2018 Mercury Marine 90-8M0125265 eng NOVEMBER 2017