IGNITION SYSTEM
90-857138R1 MAY 2000 Page 2A-15
3. Secure flywheel holder to flywheel with 3 bolts. Loosen flywheel nut until nut is flush with
end of crankshaft. Do not remove nut at this time.
57521
b
a
91-804552
a-Flywheel Holder
b-Bolts (3)
4. Thread flywheel puller into flywheel holder. While holding flywheel, tighten puller against
crankshaft until flywheel loosens. Remove flywheel holder/puller. Remove flywheel nut.
Remove flywheel.
57519
a
a-Flywheel Puller
To Next Page
Loading...
