OPERATION
92
• Never operate the starter motor once the engine has
started.
• If the starter motor won't turn over, ensure that the battery
terminal connections are tight and the battery is fully
charged.
STARTING (REMOTE CONTROL MODEL)
IMPORTANT: Before starting, read the Pre‑Starting Check List,
special operating instructions, and Engine Break‑in Procedure in
the Operation section.
EO, EPTO
1. Insert the key into the ignition.
2. Set the remote control lever to Neutral (N), and move the
neutral warm‑up lever to OPEN.
a - Fully opened position
b - Fully closed position
c - Neutral warm‑up lever
d - Ignition key switch
e - Lanyard stop switch
To Next Page
Loading...
Need help?
General
