EasyManuals Logo

Mercury 40/50 Series User Manual

Mercury 40/50 Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
FUEL AND OIL
71
IMPORTANT: During engine break‑in, engine oil must be added
to the gasoline in addition to the oil, which is automatically supplied
from the oil tank.
Mixing ratio (during break-in on oil injected models)
Gasoline Engine Oil
During break‑in 50 1
After break‑in Automatic: Fill up engine oil tank regularly
Pour oil into the fuel tank.
Pour gasoline into the fuel tank. Shake well to mix oil and fuel.
Alarm for low engine oil level
If the level in the oil tank falls below 0.4 L (0.105 US gal), the low
engine oil alarm will be triggered. The engine oil tank capacity is 2 L
(0.53 US gal).
EO, EPTO: The low oil light in the tachometer lights and the buzzer
in the remote control box sounds if the engine oil level falls below
0.4 L (0.105 US gal).
EHO, EHPTO: The low oil light is on the front portion of the bottom
cowl. The light will come on if the engine oil level falls below 0.4 L
(0.105 US gal).
a - Low oil light in tachometer
b - Low oil light on lower engine cover
Resetting the low oil level alarm:
1. Reduce engine speed to trolling RPM and steer towards a safe
area with calm water. Set the remote control lever to Neutral
(buzzer will stop).
38322
b
a

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 40/50 Series and is the answer not in the manual?

Mercury 40/50 Series Specifications

General IconGeneral
BrandMercury
Model40/50 Series
CategoryOutboard Motor
LanguageEnglish

Related product manuals