Section 4 - Maintenance
Page 62 90-8M0113924 eng DECEMBER 2015
3. Lubricate the steering pin.
a - Steering pin
Tube Ref No. Description Where Used Part No.
139
Mercury 25W-40 Synthetic Blend
4-Stroke Engine Oil
Steering pin 92-8M0078629
4. On dual engine boats: Lubricate the tie bar pivot points.
Tube Ref No. Description Where Used Part No.
139
Mercury 25W-40 Synthetic Blend
4-Stroke Engine Oil
Tie bar pivot points 92-8M0078629
5. After starting the engine, turn the steering wheel several times to starboard and then port to ensure that the steering
system operates properly before getting underway.
Throttle Cable
Lubricate the pivot points and the guide contact surfaces.
a - Pivot points
b - Guide contact surfaces
Tube Ref No. Description Where Used Part No.
139
Mercury 25W-40 Synthetic Blend
4-Stroke Engine Oil
Throttle cable pivot points and guide contact surfaces 92-8M0078629
mc71904-1
a