MAINTENANCE
83
10.Remove the oil filter from the adaptor and discard the old oil
filter and sealing ring.
11.Coat the sealing ring on the new filter with motor oil. Install the
sealing ring and filter. Tighten the filter securely by hand. Do
not overtighten.
a - Oil filter sealing ring
12.Using two wrenches, connect the oil drain hose plug to the oil
drain hose and place it back into the boat.
13.Tighten the bilge drain plug.
14.Remove the oil filler cap (port or starboard). Add oil to bring
level up to, but not over the "FULL" mark on the dipstick.
To Next Page
Loading...
