MAINTENANCE
85
2. Place a catch pan under the drain plug in the bottom of the
supercharger gearcase.
3. Remove the drain plug and drain the oil.
4. Clean and inspect the plug o‑rings, the gearcase fill and drain
hole threads and the plug threads.
5. Install the drain plug in the gearcase and torque to
specifications.
6. Fill the gearcase through the top fill hole with approximately
177 milliliters (6 oz) of oil. The oil should cover half of the
sight‑glass in the gearcase.
7. Install the fill plug and torque to specifications.
a - Drain plug
b - Sight‑glass
c - Fill plug
Description Nm lb. in. lb. ft.
Fill and drain plugs, supercharger
gearcase
13.5 10
To Next Page
Loading...
