Mercury Racing Sterndrive 600SCi - Page 97

MAINTENANCE
87
4. Remove the oil vent screw and sealing washer. Allow oil to
drain completely.
a
b
7987
a - Sealing washer
b - Oil vent screw
5. Adjust the drive unit so that the propeller shaft is level.
6. Fill the drive unit through the oil fill/drain hole with High
Performance Gear Lube until an air‑free stream of lubricant
flows from the oil vent hole.
a
87
7988
a - Oil fill/drain screw
Tube Ref No. Description Where Used Part No.
87
High Performance
Gear Lubricant
Drive unit 92-802854A1