EasyManua.ls Logo

Mercusys MW300RE - Connecting the Extender to the Internet; Setup Preparation and Requirements

Mercusys MW300RE
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect the Extender to the Internet 3
Connect the Extender
to the Internet
This chapter covers the following topics:
Before You Begin
Basic Requirements
Quick Setup
Before You Begin
Please read this guide carefully before installing and using the range extender.
The operating range of your wireless network may vary significantly depending
on the physical position of the wireless devices. Obstructions, such as metal
appliances and walls, may weaken signals by getting in the way of your
network’s radio waves.
In order to optimize the performance of the extender, please follow the
instructions below (please make sure the extender is always within the wireless
coverage of the wireless router).
Half-way Between - Generally, the ideal location for the range extender is
half-way between the wireless router and the wireless client. If the
wireless signal is not satisfactory, you may place the extender closer to
the wireless router.
Less Obstructions - Limit obstructions between the extender and wireless
router. It’s better to locate the extender in a spacious place, such as near
the corridors.
No Interference - Choose a location away from Bluetooth devices and
other household electronics, such as cordless phone, microwave, and baby
monitor, etc., to minimize signal interference.
2

Other manuals for Mercusys MW300RE

Related product manuals