TROUBLESHOOTING
61
Drive units move when the speaker is switched on or
off
This is normal as the speaker active electronics settle.
Confi guring the DSP loudspeaker does not have any
effect
Make sure that you are confi guring the DSP loudspeaker used as the
master digital loudspeaker in the system. This determines the confi guration
of all digital loudspeakers in the system.
Unit stays in standby
•
Check that it is connected correctly.
•
Turn the system on from another Meridian product in the system.
Only the master loudspeaker plays
•
Check the S5 cables are connected correctly.
Sound is odd or mono
•
Check that the DSP loudspeakers are correctly confi gured as Left and
Right respectively.
The green indicator fl ashes or stays on
This indicates that DSP clipping is occurring.
Brief fl ashes indicate occasional clipping which will not be audible.
If the indicator stays on for long periods this may indicate a fault in the
confi guration of your system, and you should contact your Meridian dealer.
To Next Page
Loading...
Need help?
General
