Page 39 of 47
Chapter 8
Appendix: System Errors
In this appendix possible error messages on the FTC320 (see Section 6.2.2) are listed.
In case of an error please check for the description of the error and the actions recommended to remove
potential causes. In case this does not lead to a solution, please contact Messkonzept and describe
the circumstances that led to this error. Some issues can be resolved through remote maintenance.
If the error persists you might be requested to send the FTC320 back to Messkonzept. Please pay
attention to these points when sending the device:
• Close gas ports to keep gas duct clean. Preferably use black rubber caps that came with delivery.
• Put the device in a suitable shockproof packing material. Preferably use the foam box that came
with delivery.
• Please attach a brief note with a description of the problem or refer to prior mail correspondence
on this subject with Messkonzept.
Never open the housing of the FTC320. Warranty is void if the housing was opened,
refrain from attempts of repairing the device yourself! Messkonzept may charge more for
the repair if the housing was opened. It is more work to check if an attempted repair by the
user lead to further damages.
File name:
FTC320Ex Operating Manual_1.09KD201009MPO3V04.pdf
To Next Page
Loading...
Need help?
General
