METER EM50 Series User Manual

11
EM50
Figure3 ECH2O Utility Main screen
In the Main Screen, you can set all logger configuration parameters with visual controls.
At the top of the program window is a toolbar for interacting with the Em50. To the left is a
battery indicator.
To the right is the Connect Via menu, where you can select a COM port, the Connect button
(which displays Disconnect when you are connected to an Em50), the Download button that
downloads data saved on the Em50 onto your computer, and the Scan button, which scans
all of the sensors connected to each port on the Em50 and returns a real-time reading. This
section covers these functions in detail.
4.2 COMMON TASKS IN ECH20 UTILITY
4.2.1 CONFIGURING THE EM50/EM50R/EM50G
The Em50 does not require any programming, but it does have several parameters that
control identity and function. To change a parameter, connect to your device, change the
parameter, then click Apply to send the parameter changes to your device.

METER EM50 Series Specifications

General

Brand	METER
Model	EM50 Series
Category	Data Loggers
Language	English