METER EM50 Series - Data Processing

34
EM50R RADIO TELEMETRY
To download and view data from the DataStation, start DataTrac. In the DataTrac3 menu,
pick the DataStation you want to connect to and click Connect. Click the Download New
Data button. The Downloading DataStation Data screen appears and provides a progress bar
displaying the download progress.
6.8 DATA PROCESSING
DataTrac3 automatically sorts the data collected by the DataStation and associates the
data with the correct logger. However, unless you used DataTrac3 to also configure your
Em50R loggers, DataTrac3 does not know your logger name and which sensors are plugged
into each port. To add this information to your data set, click on the appropriate Em50R in
the logger tree and select "Configure."
If DataTrac3 is not an option, you can use ECH20 Utility to retrieve data from your
DataStation. ECH20 Utility gives you several choices for the file type when downloading
data from a DataStation. Section 4 has more information on using ECH20 Utility for
downloadingdata.
If you choose processed or raw data file formats, ECH20 Utility walks you through processing
the data for each active logger. The ECH2O Utility prompts you for the logger type and
sensor types for each logger. This information is necessary for ECH20 Utility to process the
datacorrectly.