25.6.2009 Rev. 3.0
Troubleshooting
14
6. Troubleshooting
If the appliance fails to work, check to ensure that
• it has been used according to instructions
• all removable parts are in place
• the disconnection switch (usually on a wall or in the immediate vicinity of the ov-
en) is in the ON position
• the fuses (overload protection) have not blown in the fuse box. Ask a qualified per-
son to check overload protection.
Should the oven still not work, contact an authorised agent. Before phoning, make sure
you have at hand the appliance type and serial number to be found on the name plate on
the right front corner of the appliance.
This appliance does not contain parts which can be serviced by the user. Maintenance
must be carried out by an authorised agent.
To Next Page
Loading...
