METREL OmegaPAT MI 2140 User Manual

MI 2140 MI 2140 Omega &BetaPAT Table of contents
3
1. 1. General presentation ------------------------------------------------------------------------------5
1.1. Safety in use -----------------------------------------------------------------------------------------5
1.2. Features -----------------------------------------------------------------------------------------------6
1.3. Connection--------------------------------------------------------------------------------------------7
1.4. Applied standards-----------------------------------------------------------------------------------7
2. 2. Instrument description----------------------------------------------------------------------------8
2.1 Front panel description -----------------------------------------------------------------------------8
2.2. Instrument messages -----------------------------------------------------------------------------9
3. 3. Technical specification ------------------------------------------------------------------------- 11
3.1 Earth bond test ------------------------------------------------------------------------------------- 11
3.2 Insulation test --------------------------------------------------------------------------------------- 11
3.2 Substitute leakage test --------------------------------------------------------------------------- 12
3.3 Flash test (MI2140 only)-------------------------------------------------------------------------- 12
3.4 Leakage current and Power test --------------------------------------------------------------- 12
3.5 Touch leakage current---------------------------------------------------------------------------- 13
3.6.Polarity test ------------------------------------------------------------------------------------------ 13
4. Measurements ---------------------------------------------------------------------------------------- 14
4.1. Presentation of results --------------------------------------------------------------------------- 14
4.1.1. PASS / PASS * / FAIL result -------------------------------------------------------------- 14
4.2. Manipulation---------------------------------------------------------------------------------------- 14
4.2.1. Help option ------------------------------------------------------------------------------------ 14
4.3. Single mode ---------------------------------------------------------------------------------------- 15
4.3.1. Earth bond test ------------------------------------------------------------------------------- 16
4.3.2. Insulation test --------------------------------------------------------------------------------- 18
4.3.3. Substitute leakage test --------------------------------------------------------------------- 21
4.3.4. Flash test (MI2140 only) ------------------------------------------------------------------- 23
4.3.5. Leakage current and Power test --------------------------------------------------------- 26
4.3.6. Touch leakage current---------------------------------------------------------------------- 28
4.3.7. Polarity test------------------------------------------------------------------------------------ 30
4.4. Autotest---------------------------------------------------------------------------------------------- 31
4.5. Autotest - shortcut -------------------------------------------------------------------------------- 31
4.6. Autotest – custom--------------------------------------------------------------------------------- 34
4.7. Performing of autotests-------------------------------------------------------------------------- 36
4.8. Storing autotest results -------------------------------------------------------------------------- 43
5. Instrument operation ------------------------------------------------------------------------------- 45
5.1. Setup ------------------------------------------------------------------------------------------------- 45
5.1.1. Set date and time ---------------------------------------------------------------------------- 45
5.1.2. Set language---------------------------------------------------------------------------------- 45
5.1.3. Set print header ------------------------------------------------------------------------------ 46
5.1.4. Instrument data------------------------------------------------------------------------------- 46
5.1.5. Set Contrast----------------------------------------------------------------------------------- 46
5.1.6. Original settings ------------------------------------------------------------------------------ 47
5.1.7. Password -------------------------------------------------------------------------------------- 48
5.2. Autotests controlled by test code (use of barcode reader)------------------------------ 49
5.3. Edit users ------------------------------------------------------------------------------------------- 49
5.4. Recall / Delete / Send memory ---------------------------------------------------------------- 50
6. Maintenance ------------------------------------------------------------------------------------------- 55

METREL OmegaPAT MI 2140 Specifications

General

Brand	METREL
Model	OmegaPAT MI 2140
Category	Test Equipment
Language	English